anyaan how to improve the stability of the car when maneuvering around the corner or when overtaking. One was by installing a stabilizer that functions as a trunk connection to make the suspension movement of right and left balanced.
For motor sport utility vehicle (SUV) such as the Toyota Rush, Daihatsu Terios, Honda CR-V, Nissan X-Trail, Toyota Fortuner, Chevrolet Captiva is available stabilizer original or aftermarket such as artificial Daytona, TRD (Toyota), Goliath or Hiyashi.
"Most SUVs today, the front is equipped with stabilizers, which pairs stay behind," said Iwan of the garage 4x4 Specialist in Tanjung Duren, West Jakarta. The price range of 400 thousand to Rp1, 5 million.
The installation is not difficult. "For the Fortuner, installation is nothing more than an hour," said Ade Nur Sapatri, service advisor at Toyota Plaza in West Jakarta. At the rear suspension arm has a hole.
Here's how to install rear stabilizer; 1. Sedia key ring and quasi 17 mm 2. See the hole in the lower arm near the tire to put the stabilizer 3. right pairs advance to memudahklan installation with stabilizer hole match with the holes on the arm. 4.Setelah fitting, insert the 17 mm bolts that have been provided. Somewhat troublesome bolt is inserted through the front because the back of the arm hole. 5. Use a magnet to mennyocokkan or remove bolts with stabilizer if not quite fit the hole. Replace the bolts 17 mm plain to the front, while behind the existing bolts bulge. 6. Once the front bolts installed, insert the rear bolt through the arm holes bigger. Then tighten the bolt back and front bazut dengnan quasi key
Anda sedang membaca artikel tentang
Want a car Stable, Let Put Stabilizer
Dengan url
http://automotivetipsandtricks.blogspot.com/2011/03/want-car-stable-let-put-stabilizer.html
Anda boleh menyebar luaskannya atau mengcopy paste-nya
Want a car Stable, Let Put Stabilizer
namun jangan lupa untuk meletakkan link
Want a car Stable, Let Put Stabilizer
sebagai sumbernya
0 komentar:
Post a Comment