New Rush vs Rush Old

Because only a facelift and change of power steering and suspension tuning, of course, is generally difficult to distinguish the old with the new version of Rush. But certainly, grille change, with the center line of the old Rush eliminated. Other changes to the front bumper design. If the first bumper curved downward, now upward. Design houses fog lamps are also different.

Rear combination lamps, now consisting of over red with square angled shape and white below. While the old version with the red lights inside the bull. The side of a red light. Two under white light surrounded by red mica.

Interior: The color of the interior, the dashboard was used for air conditioning and audio. Meter combination, the head of the stick shift, left, ornamented chrome. While the automatic transmission, also no change in the bezel, is now given a chrome ornament. Console box with the hand brake is also changing its shape. Now, given the close.

12:15 AM | 0 komentar | Read More

Want a car Stable, Let Put Stabilizer

anyaan how to improve the stability of the car when maneuvering around the corner or when overtaking. One was by installing a stabilizer that functions as a trunk connection to make the suspension movement of right and left balanced.

For motor sport utility vehicle (SUV) such as the Toyota Rush, Daihatsu Terios, Honda CR-V, Nissan X-Trail, Toyota Fortuner, Chevrolet Captiva is available stabilizer original or aftermarket such as artificial Daytona, TRD (Toyota), Goliath or Hiyashi.

"Most SUVs today, the front is equipped with stabilizers, which pairs stay behind," said Iwan of the garage 4x4 Specialist in Tanjung Duren, West Jakarta. The price range of 400 thousand to Rp1, 5 million.

The installation is not difficult. "For the Fortuner, installation is nothing more than an hour," said Ade Nur Sapatri, service advisor at Toyota Plaza in West Jakarta. At the rear suspension arm has a hole.

Here's how to install rear stabilizer; 1. Sedia key ring and quasi 17 mm 2. See the hole in the lower arm near the tire to put the stabilizer 3. right pairs advance to memudahklan installation with stabilizer hole match with the holes on the arm. 4.Setelah fitting, insert the 17 mm bolts that have been provided. Somewhat troublesome bolt is inserted through the front because the back of the arm hole. 5. Use a magnet to mennyocokkan or remove bolts with stabilizer if not quite fit the hole. Replace the bolts 17 mm plain to the front, while behind the existing bolts bulge. 6. Once the front bolts installed, insert the rear bolt through the arm holes bigger. Then tighten the bolt back and front bazut dengnan quasi key

12:14 AM | 0 komentar | Read More

AC Cars Want to Stay Cool!

When system A / C (air conditioning) the car is turned on and audible suara'ces' long, freon mark is reduced or discharged. "The Freon is a liquid, but in the system A / C turned into gas through the development process with high pressure. It was then that the nature of chemical substances contained tetrafluoroethane get colder," said Hendrik, a specialist shop owner A / C Vent's.

No adverse effects to the hardware A / C or car when freon out. Conversely, if the freon until the end means that there are errors in the hardware. "In the system A / C, freon will never run out. Up to happen, it means that there are components that are leaking (usually in the hoses, evaporator, condenser or sil-sil)," explained Hendrik.

To maintain the condition of the component A / C durable, do the draining freon once a year and usahankan use the original freon. There are several brands such freoan Kalton, Klea, Duracool and more.

In addition to treatment once a year (or every 20,000 km), sisitem A / C also takes care prevebtif to work a maximum and durable.

These preventive measures 1. Spin machine. Keep the rpm is not too high (below 4,000 rpm) while driving. Because the component A / C was not created to move in high rotation.

2.Matikan A / C. When the car did not stop because of traffic jams (waited more than 10 minutes), preferably A / C turned off. This relates to the nature of Freon that had characters must always move by air circulation.

3.Jangan too long. Freon will evaporate and become its original (liquid) if old is not used. As a result, capacity can be reduced drastically due to sil-sil vulnerable make the connection A / C brittle.

4. Beware of sharp odor. The smell of smoked cabin attached to the back and attached to the evaporator. Increasingly accumulate and cause the air to the cabin smelled of sour dieembus

12:13 AM | 0 komentar | Read More

Cars Do not Need More Heated

Until now it is easy to meet people who heat up the engine before leaving for five minutes or more. If in the morning, then the time used to heat the car was going over. The question is, whether it is still required heating the car? Short answer, "No!"

Except, if the car you have is the old cars still use carburetors are equipped with a choke and platinum. At the output of new cars, which already use electronic fuel injection and electronic ignition have been using, heat the car was not necessary. Once you turn on the machine, and the indicator lights on the dashboard off, then you can directly run the car. Warming the car more effectively carried out while the car is started.

Heat up a car in a state stopped (static) is an activity that was a waste of fuel oil alone. Waste. However, the difficulty, most motorists still do it despite the writings have been published to ensure that it is not necessary. Heat up the car for long in one place will only make the air in the neighborhood polluted by emissions from the tailpipe.

However, still many people who do it. In fact, one of the online media mentions, activities heat up the car as old habits are hard to stop, old habits die hard. Heat the car is indeed a long habit of being taught to our father's grandfather. In ancient times, at the time was not yet advanced automotive technology, car heating is necessary. At that time, the raw material used to make the machines were not as advanced today. In addition, the oil was stored in the bottom of the machine down, slowly rising to the top of the machine through the iron bars that also serve to move the valve. Then the gasoline in the carburetor fogging system is not perfect so have to wait for hot engine first.

But now everything has changed. In fact, oil is at the bottom of the machine directly pumped to the top of the machine. It takes only less than 30 seconds to make the oil to circulate properly. Machine gets hot much better if instead of heating it in a state run stopped. And, there are many examples of cars that never heated and the engine still in top shape after a run of more than 250,000

12:11 AM | 0 komentar | Read More

Let's Put "Air Scoop" in the Jazz and Yaris

Create a Honda Jazz or Toyota Yaris, you want to install water scoop? The device that serves a kind of catch the wind tunnel air flow which is then channeled into the engine compartment. That way, the heat in the heart pacemaker can be reduced.

There are two kinds of water scoop. First, made from FRP or ABS plastic with a price of Rp 250,000. Second, bermaterial carbon fiber that can withstand heat up to 1,000 degrees Celsius and cost Rp 550.000.

The price was, said Willy from garage Namura Hyan in Kembangan, West Jakarta, for the Jazz and Yaris long. If for the latest model, the plastic ABS Rp 500,000, while the carbon fiber Rp 1 million. (Aries Aditya Putra)

The installation is easy and does not need special expertise. Follow the instructions below:

1. Open the bonnet

2. Open the rubber wiper transverse near

3. Remove the plastic cover to access pouring brake fluid

4. Put plastic water scoop that replaced earlier

5. Replace the rubber until blended.

12:09 AM | 0 komentar | Read More

Beware! 10 Cars Burned Triggers

Three resource persons, namely Usman Adie (Service Operation Manager Tunas Toyota), Angian (AMS mechanic) and Andrie Widjaja (audio installer Bassindo, North Jakarta) have been visited to find out the core problem.

These are the sources of fire that warrant concern and scrutiny.

1. Exhaust leak. Steam heat is transferred to the fuel line hose is gradually broken and dripping gasoline.

2. Materials. Cloth, paper or cardboard material in the exhaust manifold or exhaust on fire and grabbed the other parts of flammable because of heat.

3. Leakage. Usually at petrol hose clamp binder is less good because, resulting in gasoline leak in the engine room and can be ignited when the engine in the engine-starter or when already hot.

4. Power steering hose. With high pressure oil and suffered damaged to make the oil spread into the exhaust manifold. Generally, the car suffered a power steering hose near the exhaust manifold. This will not happen if the tube is checked when the service involved.

5. Additions or optional on the fuel hoses. Usually, klemnya not strong, as a result of gasoline leaks in space station and caught fire because the heat effect.

6. Solder. Note on a cable connection is less strong patriannya alarms can be triggered by fire because of electrical short circuit.

7. Power cord. Because the crushed and peeled and touched the body that cause electrical short circuit.

8. Cable accumulate. Usually on the battery, regardless because of a shock. When touching the negative cable at battery or body, there was electrical short circuit.

9.Sambungan cable. Because less potent cause wires shorted wire between positive and negative. Coupled with a fuse that is too large, so that the wires become hot and smoke arising.

10. The biggest possibility is the O ring on the injector. If the signs are wet, carefully mean O ring is brittle making fuel out of the injector and if left unchecked and exposed to a heat engine, feeding the fire will arise.

12:08 AM | 0 komentar | Read More